COVO · AMADA-compatible punches

AMADA Punch 11.831 - 85°

Model: 11.831

Product Details

Manufacturing standard

Material: 42CrMo,
Working radii: COVO HRC 58–60 process range where specified.
Precision-ground working and locating surfaces.
Matched locating faces for parallel installation and repeat setup.
Model identification and traceability marking as specified.

Clamping interface

COVO · Clamping interface — System illustration. Dimensions refer to the pictured interface examples, not to the selected model. Confirm the upper clamp and lower holder against your machine drawing.

Your selected profile

Angle: 85°
Tip radius: R 0.6 mm
Height: 85 mm
Catalog load: 120 kN/m max.
Material: 42CrMo,

Catalog views for this model. Open the drawing to inspect the complete profile; use the approved drawing for final dimensions and allowable load.

Tool lengths · Punches / top tools

Choose the working length to suit your bending setup. The standard family options below are subject to model, stock and quotation confirmation.

835 mm · Full-length punch

COVO 835 mm — Length illustration; the actual cross-section follows the selected model.

415 mm · Short-length punch

COVO 415 mm — Length illustration; the actual cross-section follows the selected model.

800 mm sectionalized

10 sections, including left- and right-hand horn ends, supplied as a matched set. Combine sections to suit different bending lengths.

COVO · 800 mm sectionalized — Illustrative segmentation and horn geometry, not a production drawing. Confirm the exact segment list and end details with COVO before ordering.

Final configuration review

Press brake brand and machine model
Required working or bend length
Material grade and sheet thickness
Finished profile or part drawing

Ask About This Tool · Email This Product